Valve system and linkage used to moderate steam flow into a turbine and control RPM and power output
A type of motor which does mechanical work by expanding compressed air. Pneumatic motors generally convert the compressed air energy to mechanical work through either linear or rotary motion. Linear motion can come from either a diaphragm or piston actuator, while rotary motion is supplied by either a vane type air motor, piston air motor, air turbine or gear type motor.
A fan blade inside or outside the alternator that protects the system by helping dissipate heat generated during working process.
Cable used primarily for 120 volt outdoor and overhead service applications.
Bare aluminum conductor, steel reinforced motion-resistant cable used for overhead transmission lines.
Primarily used for overhead secondary distribution lines. Installed on insulators, treated as a bare conductor.
Insulated cable with aluminum conductor, used to supply 3-phase power to service entrance.
A 600 volt aluminum conductor, polyethylene insulated service entrance cable.
Cable used for 600 volt service entrance applications requiring high-heat, moisture and sunlight resistance.
Insulated aluminum conductor cable, used to supply power to user's service head.
A device to automatically recharge the electricity to the capacitor built-in on the equipment for normal operation even during the power breakdown of equipment of the rack system.
A type of equipment that automatically enables clutch conversion without separate manipulation. It does not have clutch pedal and the gear is changed automatically in accordance with the given situation only through manipulation of lever for speed change.
A generator used to store or supply electric energy using auxiliary power sources including battery.
The axial piston motor is a type of hydraulic motor which has six pistons mounted axially ie., along the shaft contained in a swash plate which is fixed to the pump shaft When hydraulic oil flows into it, the oil operates the piston, which in turn will rotate the output shaft
Electrical cable which affixes to the backplane (as opposed to the front) of an I/O modular chassis.
Type of cable used to supply power in underground mining
Type of cable used to supply power in underground mining applications
Type of electrical cable used in underground mining to supply power underground
Wiring or cable assembly for connection to automotive vehicle battery
A discharge resistor that discharges a battery. Has capabilities including adjustment of discharging current and automatic interruption at set discharging time or set final discharge voltage.
An energy storage system / power management system provides firm frequency response (FFR) services, performs Triad management, wholesale trading, and other related services (includes lithium-ion batteries), and evaluates user consumption data taking weather statistics into account, to determine the ideal charging and discharging intervals. It is fully integrated into the ESS system, including the battery modules, an integrated power inverter, a power management unit, along with electronic meters for power consumption in the building, photovoltaic power generation, and power sharing.
A tool which required to repair the battery
Gear box using bevel gears to transmit torque at a 90 degree angle.
A braided 600 volt automotive cable that operates within the minus 40degree to plus 85 degree centigrade range.
A braided 600 volt automotive cable that operates within the minus 40degree to plus 100 degree centigrade range.
A braided 600 volt automotive cable that operates within the minus 40degree to plus 125 degree centigrade range.
A braided 600 volt automotive cable that operates within the minus 40degree to plus 150 degree centigrade range.
A braided 600 volt automotive cable that operates within the minus 40degree to plus 175 degree centigrade range.
A braided 600 volt automotive cable that operates within the minus 40degree to plus 200 degree centigrade range.
A braided 600 volt automotive cable that operates within the minus 40to plus 225 degrees C range
A braided 600 volt automotive cable that operates within the minus 40degree to plus 250 degree centigrade range.
A braided 60 volt automotive cable that operates within the minus 40degree to plus 85 degree centigrade range.
A braided 60 volt automotive cable that operates within the minus 40degree to plus 100 degree centigrade range.
A braided 60 volt automotive cable that operates within the minus 40degree to plus 125 degree centigrade range.
A braided 60 volt automotive cable that operates within the minus 40degree to plus 150 degree centigrade range.
A braided 60 volt automotive cable that operates within the minus 40degree to plus 175 degree centigrade range.
A braided 60 volt automotive cable that operates within the minus 40degree to plus 200 degree centigrade range.
A braided 60 volt automotive cable that operates within the minus 40to plus 225 degrees C range
A braided 60 volt automotive cable that operates within the minus 40degree to plus 250 degree centigrade range.
A type of auxiliary device used in installation and removal of brake drum by delicately adjusting drum with heavy weight.
AC motor for a braking device.
Wire produced from brass - an alloy of copper and zinc.
Camshaft bearings used in internal combustion engines.
A specialized mechanism used to control release of vapors from the purge canister in automobile evaporative emissions systems
A polyethylene dual insulated foam skin aluminum sheathed cable which is used on pulse code modulation line and cable used in the carrier frequency range.
A device that ensures a frictional connection between the motor shaft and gearhead.
Base where the clutch handle of a motorcycle is located
This is a type of clutch which has a ratchet and pawl mechanism inside which will allow rotation only in one direction.
Elements that are part of the clutch cylinders, which at the same time are composed of various accessories that allow their assembly and connection inside cylinders.
Wiring harness components containing coaxial cable
Wiring assembly configured as extendable coil
Multi-cables are composed of various quantities of coaxial, twinaxial, pairs and singles cabled together per customer's specification, shielded and jacketed with various materials and colors.
Instruments to detect presence of any gas that represents a damage or safety hazard in power generation turbines
A communication cable that is manufactured to connect to equipment with different each end or both ends.
These control panels are used in Gas and Steam compression equipment and machinery
A pulley with more than two neighboring grooves and flat or coffin shaped surface for each stage with different diameter or pulley with a single inclined surface.
Connecting rod bearings, both big and small end, used in internal combustion engines.
A device to store, manage, control, organize, or otherwise protect cords, cables, cord sets, extension cords, audio cables.
Includes various shrinking/crimping muffs
Current -limiting reactors are equipment that provide reactance (thus current intensity) in an electric circuit.
Gear reducer using rolling elements and a multilobe cam to transmit torque.
A diesel engine is a type of internal combustion heat engine, powered by diesel, Large diesel engines have power ratings in excess of 750 kilowatts. These unique engines are used for marine, locomotive, and mechanical drive applications and for electrical-power generation. In most cases they are direct-injection, turbocharged and aftercooled systems.
A diesel engine is a type of internal combustion heat engine, powered by diesel, Medium engines have power capacities ranging from 188 to 750 kilowatts, or 252 to 1,006 horsepower. The majority of these engines are used in heavy-duty trucks. They are usually direct-injection, in-line, six-cylinder turbocharged and aftercooled engines.
Specialty valve capable of withstanding extremely high pressures present during compression and combustion phases of an automotive diesel fuel system.
A type of diesel engine that can be attached to the outside of a boat's hull and can be easily removed from the hull by a simple operation.
Valve that can take various configurations used to mix fuel and air in a desired ratio in an automotive diesel fuel system.
A spider with four radial shaped arms designed to form connecting section between two shafts, one of which rotates while the other shaft is stopped or rotates with different speed or in different direction.
Wire suitable for extending an open wire or cable pair from a pole or cable terminal to a building.
Used in the storage of energy or power.
A cable for electricity that is designed for the terminal process to connect the ends of both sides or one end to the other item.
A device that is powered by electricity among the energy switching machines installed inside a ship.
A clutch that conveys torque with electromagnetic force generated by the built-in electromagnetic coil with quick response and ease of control.
Control system for diesel automotive engines
Control system for gasoline engines
A gasket that sits between the engine block and cylinder head(s) in an internal combustion engine
A machine with moving parts spares that converts power into motion.
The export cable connects the offshore and onshore substations.
A length of fiber optic cable that has been terminated with a connector, pigtail or other component.
Water cleaning equipment. Prevents objects in the local water (rivers, lakes, dams) from entering power plant systems.
An optical cable that is used in communication lines exposed to fire danger.
Flare tip is a large burner or arrangement of smaller burners fitted at the end of flare risers to safely ignite and burn all discharge of flare gas.
Ribbon or other flat configuration cable or wire assembly
A pulley with straight line surface or higher surface in the upper section. Includes flange with leather belt wound around it.
Special battery pack designed for use with florescent ballasts.
A device that supplies gas fuel at the temperature and pressure required by engines for ships and land power generation.
An electronic device that is a component of an automotive electro mechanical actuation system in an automotive diesel injection system.
An electronic device that is a component of an automotive electro mechanical actuation system in an automotive gasoline injection system.
Switchgear is the switching equipment used in the generation and transmission of electric power. This commodity includes switchgear that is gas insulated.
A type of internal combustion engine that uses the explosion of a petroleum based fuel, caused by a spark, to expand a gas thus pushing a piston. There are two and four stroke engines. The thermodynamic cycle used is known as the Otto Cycle.
Gasoline generator sets are generally compact, quieter, and versatile. Often, these generator sets have lower power, up to 6 kW, and deliver a single-phase current.
A gasoline engine mounted outboard of a small boat for propulsion.
A flame detector is used to detect presence of flame in gas turbine combustion system
These panels control the functions of gas turbines in power generation
A type of generator powered by a gas turbine engine.
An internal combustion engine in which expanding gases from the combustion chamber drive the blades of a turbine.
Axle assembly with more than one bevel gear.
A motor having a NEMA ""B"" design, listed and offered in standard ratings, with standard operating characteristics and mechanical construction for use under usual service conditions without restriction to a particular application or type of application (NEMA).
These panels monitor general functionality of generators for plant protection.
Natural gas driven generator sets, which produce electricity in continuous form
Double reduction reducer consisting of both a worm and worm gear set as well as a helical gear set.
Gear reducer using helical cut gears to transmit torque.
A belt used to convey motive power with a hexagonal cross section. It is used in multi axial electric motors that need conveying of motive power on both sides of upper and lower portion of the belt simultaneously.
This kit consists of high temperature resistant sleeves, which are mounted on the cable.
This kit consists of high temperature resistant sleeves, which are mounted on the cable at the termination ends.
A safety mechanism used to shut off machinery/system in an emergency.
A component composed of a fluid conveying pipe that can swivel around a fixed shaft enabling hydraulic fluid to flow in two directions.
A device that converts current from a battery into the high-voltage current required by spark plugs.
A cable of specialized construction generally consisting of conductive and non conductive materials used for transmitting high voltage electricity to the cylinders of automotive engines.
A device that distributes and regulates the high voltage generated by the ignition coil to each cylinder in an engine and controls the time of ignition in accordance with the number of revolutions of and load on the engine.
A device used as a component of a theft deterrent system in an automotive ignition system such that vehicle starting is enabled only when specific codes are exchanged between the coil and the vehicle key, remote starter or other starting device.
A type of power generating equipment that generates impulse voltage to be used in testing of insulation capacity of electrical devices or dielectric strength of insulation structure of cable and research on high voltage phenomenon.
A type of electrical alternating current motor.
A fluid added to the fuel tank to clean fuel injecting devices
Cables used for installation purposes, in general.
Wires used for installation purposes.
Single/multi pair; shielded/non-shielded; 300/600 volts; stranded conductor; suitable for installation in trays, troughs, channels, conduit, wireway; ITC/PLTC types.
Used as electrical wire.
The cables between the turbines and in to the substation, typically 66 kV.
A structure in which pole flanges attached to the driving shaft and the driven shaft are interlocked with each other. Flange on one side is inserted through feather key at the end of the shaft through the key, in order to enable it to move in parallel.
An internal combustion engine which uses high-temperature gas produced by combustion of fuel using oxygen in the inside of the engine.The gas is discharged through the jet nozzle, which generates thrust in reaction.
Crankshaft main bearings and thrust washers used in internal combustion engines.
Mechanically operated clutch.
Accessories and accessory kits used with motion control devices.
Motor component designed to properly contain and position motor brushes
Enclosures for motor protection
A device commonly used for torque smoothing in electric motors
Laminations are stamped parts made of special low-carbon, high-silicon steel used in the production of electric motors.
Component used to build servo torque motors.
The rotor is part of the motor that revolves.
A stator is made up of windings that are inserted into a lamination stack. The stator is stationary and is mounted in the motor housing; when electric current is applied the stator provides a magnetic field that enables a rotor to revolve.
A multi core 600 volt automotive cable that operates within the minus 40degree to plus 85 degree centigrade range.
A multi core 600 volt automotive cable that operates within the minus 40degree to plus 100 degree centigrade range.
A multi core 600 volt automotive cable that operates within the minus 40degree to plus 125 degree centigrade range.
A multi core 600 volt automotive cable that operates within the minus 40degree to plus 150 degree centigrade range.
A multi core 600 volt automotive cable that operates within the minus 40degree to plus 175 degree centigrade range.
A multi core 600 volt automotive cable that operates within the minus 40degree to plus 200 degree centigrade range.
A multi core 600 volt automotive cable that operates within the minus 40to plus 225 degrees C range
A multi core 600 volt automotive cable that operates within the minus 40degree to plus 250 degree centigrade range.
A multi core 60 volt automotive cable that operates within the minus 40degree to plus 85 degree centigrade range.
A multi core 60 volt automotive cable that operates within the minus 40degree to plus 100 degree centigrade range.
A multi core 60 volt automotive cable that operates within the minus 40degree to plus 125 degree centigrade range.
A multi core 60 volt automotive cable that operates within the minus 40degree to plus 150 degree centigrade range.
A multi core 60 volt automotive cable that operates within the minus 40degree to plus 175 degree centigrade range.
A multi core 60 volt automotive cable that operates within the minus 40degree to plus 200 degree centigrade range.
A multi core 60 volt automotive cable that operates within the minus 40to plus 225 degrees C range
A multi core 60 volt automotive cable that operates within the minus 40degree to plus 250 degree centigrade range.
A type of automotive cable screened with aluminum foil and or copper braid around each of the conductors in the cable and or around the entire cable to screen electromagnetic interference.
A type of automotive cable screened with aluminum foil and or copper braid around each of the conductors in the cable and or around the entire cable to screen electromagnetic interference.
A type of electrical alternating current motor.
A motor wound in such a way that varying connections at the starter can change the speed to a predetermined speed.
Floating foundation is normally used in locations with depths over about 60–80 m.
The gravity foundations are used preferably in waters with a maximum depth around 30 meters, are made of precast concrete and are ballasted with sand, gravel or stones.
The primary function of a jacket is to support the static and dynamic loads of the wind turbine by anchoring it firmly to the sea bed using a set of pin piles. Secondary functions include supporting the wave loads on the jacket itself and enabling cable entry.
The primary function of a monopile is to support the static and dynamic loads of the wind turbine through anchoring it firmly to the sea bed using the embedded part of the monopile. Secondary functions include supporting the wave loads on the monopile itself and enabling cable entry.
The offshore substations are used to reduce electrical losses before export of power to shore. This is done by increasing the voltage, and in some cases converting from alternating current (AC) to direct current (DC) The substation also contains equipment to manage the reactive power consumption of the electrical system including the capacitive effects of the export cables.
The transition piece provides the connection between the foundation and the tower, typically extending around 20m above mean sea level (MSL). It also supports secondary steelwork which provides functions such as allowing personnel access via a work platform, supporting cables and supporting the corrosion protection system.
The tower is typically a tubular steel structure that supports the nacelle. It also provides access to the nacelle and houses electrical and control equipment. Also provides shelter and storage for safety equipment.
The turbine (nacelle, blades) converts kinetic energy from the wind into three-phase AC electrical energy.
Lubricating oil dispensing or metering device that measures and injects lubricant as required.
SO cable denotes a portable, oil-resistant cable comprised of 2 or more conductors, which can be used in both indoor and outdoor applications. This versatility allows SO cable to be utilized in a variety of environments including commercial, residential and industrial facilities.The high stranding in SO cable creates extra flexibility that further promotes its use in a wide variety of applications.
A pump component that enables filtration by the strainer which is installed on the intake of an oil pump.
The onshore substation transforms power to grid voltage, for example 400kV. Where a high voltage DC export cable, the substation will convert the power three phase AC.
Fiber optic communications cable, which is used externally. This commodity includes products such as optical aerial telcommunication cable, direct burried fiber optic cable and underwater fiber optic cable.
Wiring harness for connection to vehicle oxygen sensor
Generator / Lighting Petrol 800VA, 640W,220V
Power generation device using piezoelectric effect that generates electricity when pressure is applied
Nozzles and valves used to direct and control oil spray to the piston in order to cool it down in internal combustion engines.
A component that plays the role of connecting link that conveys the gas pressure generated at the time of explosion of gas in the combustion chamber of internal combustion engine from the piston to the connecting rod.
Gear reducer consisting of planetary gear sets.
Pneumatically operated clutch
A device used to control pressure, flow, or flow direction in an air or gas system. A poppet damper contains a weight or spring-loaded poppet device that opens when the pressure differential across it exceeds a predetermined value.
Electrical cord with connectors on both ends that allow portability of connectivity.
A type of motor designed for use in pressure washers and steam cleaners.
A radial piston motor is a type of hydraulic motor which has six pistons mounted radially to the shaft. When hydraulic oil flows into it, the oil operates the piston, which in turn will rotate the output shaft.
A wire made of copper with rectangular shaped inner core.
Secondary battery that charges and discharges by oxidation and reduction reaction of electrolyte
A device that charges and discharges electricity through an electrochemical reaction between sodium ions dissolved in seawater and water.
A type of generator which operates more than two rotating bodies in an electrically equal or regular velocity ratio which are impossible to connect mechanically.
A clutch that enables speed change through clutch connection only with gear lever manipulation.
A helical gear reducer designed for mounting directly on the drive shaft.
A device that enables a step change in the diameter of a shaft, to provide a bearing surface for axial loads.
An optical cable that is used for interior distribution of a building, such as wall, ceiling and others. The number of insulated conductors is 1 to 2, and this is frequently applied on the jumper code, the cable for connection between the terminal devices in the interior optical distribution box and connection between the interior optical transmission equipment.
A 600 volt high-heat and moisture-resistant cable primarily used in conduit or raceways.
A single core 600 volt automotive cable that operates within the minus 40degree to plus 85 degree centigrade range.
A single core 600 volt automotive cable that operates within the minus 40degree to plus 100 degree centigrade range.
A single core 600 volt automotive cable that operates within the minus 40degree to plus 125 degree centigrade range.
A single core 600 volt automotive cable that operates within the minus 40degree to plus 150 degree centigrade range.
A single core 600 volt automotive cable that operates within the minus 40degree to plus 175 degree centigrade range.
A single core 600 volt automotive cable that operates within the minus 40degree to plus 200 degree centigrade range.
A single core 600 volt automotive cable that operates within the minus 40to plus 225 degrees C range
A single core 600 volt automotive cable that operates within the minus 40degree to plus 250 degree centigrade range.
A single core 60 volt automotive cable that operates within the minus 40degree to plus 85 degree centigrade range.
A single core 60 volt automotive cable that operates within the minus 40degree to plus 100 degree centigrade range.
A single core 60 volt automotive cable that operates within the minus 40degree to plus 125 degree centigrade range.
A single core 60 volt automotive cable that operates within the minus 40degree to plus 150 degree centigrade range.
A single core 60 volt automotive cable that operates within the minus 40degree to plus 175 degree centigrade range.
A single core 60 volt automotive cable that operates within the minus 40degree to plus 200 degree centigrade range.
A single core 60 volt automotive cable that operates within the minus 40to plus 225 degrees C range
A single core 60 volt automotive cable that operates within the minus 40degree to plus 250 degree centigrade range.
A type of electrical alternating current motor.
Motor control device that takes a signal representing the demanded speed and drives a motor at that speed.
Electric motor with outstanding ability to withstand spontaneous overload due to high torque, and is used for main axle of computer numerical control CNC tooling machine and dedicated machines and equipment requiring high speed revolution.
A cell used as standard when measuring electric potential difference. Designed to operate with prescribed electromotive force when the temperature is uniform. Used on the basis of voltage rather than current.
These panels control the functions of steam turbines in power generation
A machine for producing continuous power in which a wheel or rotor, typically fitted with vanes, is made to revolve by a fast-moving flow of water, steam, gas, air, or other fluid.
Water cleaning equipment. Prevents objects in the local water (rivers, lakes, dams) from entering power plant systems.
An optical cable for seabed that is coated with the jute asphalt CaCo3 with the first and second iron wire external layer by having the external part with the lead cover, galvanized steel wire and others in consideration of external impact and water pressure for the purpose of installation in shallow seas.
A motor designed to operate while submerged in liquid.
Switchgear is the switching equipment used in the generation and transmission of electric power. This commodity is used specifically in substation applications (heavy volume).
These are switches used to regulate power in a switchyard (enclosed area of a power system that contains the switchgear).
Surge arrestors stop the flow of electricity. These specifically are utilized in a switchyard (enclosed area of a power system that contains the switchgear
A type of high performance positive drive power transmission belt.
Device used with high performance positive drive power transmission belts
A power generator that generates electricity by converting the energy contained in waves into driving force of prime mover like turbine, etc.
Copper wire that has been coated with tin to protect against corrosion.
A cable which is used in relay between toll switches or between broadcasting stations.
Unit using chain and variable conical pulleys.
Cable used to supply power to underground mining machinery.
Cable assemblies used to supply power to mining machinery with connection plugs installed.
Water cleaning equipment. Prevents objects in the local water (rivers, lakes, dams) from entering power plant systems.
A component that fixes the turbine blade in the axial flow of a turbine engine thereby conveying the motive power obtained from the blade to the rotor shaft.
The turbine shaft is the very important part of the turbine.The simplest turbines have one moving part, a rotor assembly, which is a shaft with blades attached.
The stator is the very important electrical part of the turbine. It contains all the coils of wire which will have voltage induced in them as the magnets pass over them. It's defined as the 'stator' because it is the 'stationary' (it doesn't turn) part of the alternator
A type of electric motor powered by the ultrasonic vibration of a component, the stator, placed against another component, the rotor or slider depending on the scheme of operation rotation or linear translation. It is used mainly in communication equipment such as mobile phone, etc.
A kind of power transmission device that converts the rotational motion of the camshaft into straight line motion of pushrod.
A device used to control pressure, flow, or flow direction in an air or gas system. A vane damper is in round or rectangle shape with many swivelling vanes parallel to each other operated by means of a actuator.
A type of pulley that can mechanically adjust to accommodate various pitch diameters.
A type of definite purpose motor developed to meet the specific needs of the vertical turbine pump industry. Employs a hollow shaft through which a pump shaft is extended. Adjustments to lift the impellers and give a running clearance for the pump casing can be made by turning a nut threaded on the shaft which is accessible at the top portion of the motor. Vertical turbine pump shafts are usually composed of many lengths joined by screw thread couplings.
Water cleaning equipment. Prevents objects in the local water (rivers, lakes, dams) from entering power plant systems.
A rubber or plastic component with a through hole used to protect wiring harnesses from abrasion, pinching or other damage as they pass through holes in metal or other hard, sharp or otherwise non-compliant materials
Gear reducer using a worm screw and worm gear to transmit torque.