Services to acquire 2/d, 3/d, 4d land seismic data, includes speculative seismic data.
Services to acquire 2/d, 3/d, 4d marine seismic data, includes speculative seismic data.
Services to provide reports, reservoir attributes, visualization theatre, and workstations.
Services to process 2/d, 3/d, 4d seismic data.
Performing abrasive tubular cleaning services.
Provision of a platform, semisubmersible, or floating vessel specially built or adapted to act as living accommodation for offshore personnel in the oil & Gas industry, and may also include the ability to hold operational equipment and carry out operational activity.
Services for a well-stimulation operation in which acid, usually hydrochloric acid hcl, is injected into a carbonate formation at a pressure above the formation-fracturing pressure.
Services for the treatment of a reservoir formation with a stimulation fluid containing a reactive acid.
The pumping of acid into the wellbore through coiled tubing.
Typically before a sand control treatment, the formation near the wellbore is acidized to remove any damage caused during drilling or preparatory work on the well.
Acoustic logging to provide representation of the integrity of the cement job.
Using sound waves for measurement when drilling.
Converting sound waves for transmission when drilling.
Services to process the acoustic waves into images
Compositional analysis of natural gas including CO2
Analysis of nutrients in water
Analysis of organic acids in water
Services to reduces trips for core jamming, to improved coring efficiency
Asset Integrity Management (AIM) is the practice of managing an asset (power plant, oil platform, pipelines, refinery, etc.) to ensure its ability to perform its function effectively and efficiently.
A term used to describe the practice of managing an asset (power plant, oil rig, refinery, etc) to ensure its ability to perform its function effectively and efficiently is maintained.
Control the growth of bacteria, fungus
Services for pipelaying or derrick services located on a barge.
Service to rent or lease blow out preventers and associated equipment
Logging to measure the geometry of a borehole.
Processing the data of the borehole image
Includes checkshot, cross well, deviated and slim hole, rig source, offset source, walkaway, salt proximity, microseismic fracture monitoring, 3d, 4dvsp
Includes checkshot, cross well, deviated and slim hole, rig source, offset source, walkaway, salt proximity, microseismic fracture monitoring, 3d, 4dvsp.
Permanent or semi-permanent receiver placement borehole seismic services for long term reservoir monitoring of microseismic data.
Services to design and process borehole seismic data. Includes survey design and integration of borehole and surface seismic data.
Services that pull liquid from the bottom of the hole.
Service that constructs underground bunkers that hold surges of coal from feed belts and release material to main belt at steady feed rate.
Services to deploy submersible pumps on a cable.
Installation of cable through coiled tubing.
Use of caliper for measuring diameter of wellbore.
Maintenance is usually performed on canal systems. The work involves cleaning, weeding, de-silting, reshaping, and making minor repairs.
Services to acquire data that provides samples of the formation used to predict solids properties, such as asphaltenes, wax and hydrates, which need specific facility handling, separation and disposal through a cased hole.
Installation of production equipment in a cased hole.
Cementing services performed through casing
Services to create a casing exit/window with coiled tubing services.
Services to interpret the data from electronic inspection of casing to detect defects
Includes mechanical casing inside diameter measurement, electromagnetic casing thickness measurement.
A cathodic inspection is the only way to verify sacrificial anode systems are working properly. Cathodic protection is a method for preventing corrosion on submerged and underground metallic structures. To protect numerous structures against corrosion, such as ships, offshore floaters, subsea equipment, harbors, pipelines, tanks basically all submerged or buried metal structures etc
Service that pumps cement into the wellbore through coiled tubing.
Services to use chemical cutters to cut coiled-tubing, tubing, casing, and drill-pipe and other tubulars.
Service that makes a chemical cut through coiled tubing.
Equipment for monitoring chemical treatments.
The removal of wellbore-fill material through coiled tubing.
Services to pump carbon dioxide into underground.
Coiled tubing and stimulation service including N2unit is used for many well intervention operations and certain drilling applications. Coiled tubing (CT) refers to a continuous length of small-diameter steel pipe and related surface equipment as well as associated drilling, completion and workover, or remediation, technique. Well stimulation is a well intervention performed on an oil or gas well to increase production by improving the flow of hydrocarbons from the reservoir into the well bore.
Uses coiled tubing rig.
Services using coiled tubing with downhole mud motors to turn the bit to deepen a wellbore.
Services to plan projects using coiled tubing services.
To create holes in the casing or liner to achieve efficient communication between the reservoir and the wellbore through coiled tubing.
Cleanup tools that prepare the well for cementing and completions. Cleaning tools are designed for the scraping and brushing of the riser, wellhead, and BOP. These tools are robust enough to meet the rigors of modern precompletion wellbore cleanups while also being versatile.
Service can include repairs, cleaning, lubrication, replacement of critical items, doing a factory reset, doing cosmetic improvements, doing factory specified or in house recommended changes, replacement and/or upgrading etc
The use of oilfield hardware through coiled tubing.
Compositional analyses of pressurised samples and dead oil
Compositional analysis of natural gas according to ASTM D1945
Simulation services and training services for oil and gas drilling and completion projects
Service for Visual inspections of the connection’s welds, threads, and critical sealing components , Make-up and break-out performance ,Geometrical distortion measurements outside normal manufacturing tolerances, API 5C5 water seal ability tests with loads up to 100% of the pipe body VME stress, Magnetic particle inspection (MPI) of the connection’s welds, threads, and critical sealing components ,Small-scale coupon mechanical testing to determine post-hammering material properties ,Testing and Monitoring a Large-Diameter Conductor Casing Connection During Hammering Installation and Assessing Its Performance etc
Services to remove core sample from the wellbore.
Pumping services using conventional pumps
Services to utilizing existing vertical wellbores from which to perform directional drilling.
The use of coiled tubing to convey inflatable packers.
Core analysis performed by provider at supplier location or on the job site.
Services to isolate the core in order to bring to it the surface.
Services to keep the core in the same state as when it was brought to the surface.
Obtaining a core sample through coiled tubing.
Inhibit corrosion
Analytical services regarding loading samples of hydrocarbons
Allocation of produced crude oil and condensate regarding partner ownership of produced hydrocarbons
Cuttings Re-Injection (CRI) involves injection of waste from drilling operations (slop and drill cuttings) into a suitable deep geologic formation. Injection will typically require pressures that result in hydraulic fracturing in the formation.
Services to archive or store archived data
Mooring services using strong buried anchors for holding the vessel in place.
Well workover services to restart flow
Storage includes subsea equipment's, chemicals energy storage, flexible pipe products and technology etc.
Services for rigs located in offshore areas where water depths exceed approximately 600 feet.
Services for Inspection, Installation, Functional and pressure testing ,Repair , Maintenance and preservation, Test data acquisition and post-processing , Refurbishment, Repair of well containment free-standing hybrid risers, fluid transfer system between a temporary production riser and a drillship etc.
Measurements of the macroscopic content of minerals.
Measurement of the bulk density of the formation when drilling.
Service to monitor diesel fuel condition
Services to determine formation lithology, porosity and fluid characteristics using acoustic methods.
Services to process the data to determine the direction and angle of formation dip in relation to the borehole
Using two poles of opposite polarity to generate a field, for excitation and detection of shear waves.
A bottom hole assembly (BHA) is a component of a drilling rig. It is the lowest part of the drill string, extending from the bit to the drill pipe. The assembly can consist of drill collars, subs such as stabilizers, reamers, shocks, hole-openers, and the bit sub and bit. Equipment service assembly includes a mud motor, directional drilling, and measuring equipment, measurements-while-drilling tools, logging-while-drilling tools, etc.
Intangible drilling costs include everything but the actual drilling equipment. Labor, chemicals, mud, grease, and other miscellaneous items necessary for drilling are considered intangible
Directional drilling is the practice of accessing an underground oil or gas reserve by drilling in a non-vertical direction. Directional drilling is also called directional boring. Directional drilling increases the efficiency of oil and gas extraction and can also lessen the environmental impact of drilling. Integrated Drilling Services is a new concept in which all services and equipment and even in some cases material procurement are integrated under one contract.
Lost circulation is defined as the total or partial loss of drilling fluids or cement to high-permeability zones, cavernous formations and natural or induced fractures during the drilling or completion of a well. Prevalent drilling problems include pipe sticking, lost circulation, hole deviation, pipe failures, borehole instability, mud contamination, formation damage, hole cleaning, H2S-bearing formation and shallow gas, and equipment and personnel-related problems.
Specialist manpower that work as consultants in drilling and petroleum engineering functions for various directional drilling, Measurement while drilling (MWD) Logging while drilling (LWD) refer to measurements taken down in the well using instruments that travel along with the drill bit and the rest of the bottom hole assembly.
Directional drilling motor service is the practice of accessing an underground oil or gas reserve by drilling in a non-vertical direction, a mud motor (or drilling motor) is a progressive cavity positive displacement pump (PCPD) placed in the drill string to provide additional power to the bit while drilling.
By spinning the bit at a high RPM, drilling turbines help achieve high performance in hostile drilling environments. When coupled with diamond-impregnated bits or our proprietary PDC bits, turbines deliver extended run lengths to help reach TD in one run.
Services for directional logging.
Measurements while drilling used to update the map and reduce the risk of collision with existing wells.
Diving Support Vessel (DSV) is designed for diving operations carried out below and around oil production platforms and related installations in open waters. These vessels are used for underwater repair, inspection, construction works, well intervention and etc.
Services to increase the size of the borehole part of directional or performance drilling services.
Services to increase the size of the wellbore part of directional or performance drilling services.
Use of stabilizers such as roller reamers, hole openers, keyseat wipers, our proprietary design fixed blade hole opener, float valves, crossovers, non magnetic tools of all types, steerable tools, to keep flow rate and well pressures constant
Services to relieve drilling pipe stuck downhole.
Repair services for drilling tools
Services to minimize torque or drag.
Rental of tubular goods such as casing or tubing or drill pipe
Services to suppress drill string vibration - drilling dynamics services.
Engineering services for drilling and completion fluids
Services to assess which are the appropriate downhole fluids to use.
Services to test and analyze downhole fluids.
Services to analyze downhole fluid samples.
Services for pumping downhole.
Services to record conditions downhole.
Repairs to downhole tools
Maintenance and repair of drill bit hydraulic lifting services
The aim of any drilling optimization or risk management project is to minimize, monitor, and control the probability and/or impact of unfortunate events. Drilling optimization services are based on unmatched drilling expertise, operational experience, and advanced technologies.
A rental service basis for conventional and unconventional drilling applications and tools, supply and servicing of Equipment including Tools, Jars, Accelerators & Stabilizers, Rotating Heads, Kellys, Bushings, Drilling Spools & Adapters, BOP's, flanges, spools & control Equipment
Well seismic data is recorded from within the drill pipe.
Tests for reservoir pressure, permeability, skin, or productivity, downhole pressure measurements to determine reservoir characterization.
Services to provide pumping into a single wellbore having tubulars and equipment that enable production from two segregated zones.
Data processing service means the service of reception, storage, processing, emission, routing or transmission of data by means of computer system and includes networking services etc
Services including Perforating ,Well integrity , Pipe recovery, Completion, intervention and abandonmen, production, Production logging in service read out etc
Lost hole means a well which cannot be completed or further drilled because of mechanical difficulties, accidents of construction, or geological conditions.
An electric wireline is a high strength mono conductor electric cable that is conveyed down a well. It can be used to lower equipment, such as explosive gun strings, down the well and to provide readouts of important data. Electric wireline manpower services can be used to perform essential tasks and to provide information required for making critical management decisions, as a conveyance for the acquisition of subsurface petrophysical and geophysical data and the delivery of well construction services such as pipe recovery, perforating, plug etc
Auxiliary services that helps to monitor, evaluate and maintain their oil and gas wells.
Open hole services covers wireline logs record formation electrical resistivity, bulk density, natural and induced radioactivity, and hydrogen content. Measurements obtained are interpreted to give a continuous record versus depth for formation properties such as porosity, water saturation, and rock type.
A service include transportation from manufacturer to warehouse, warehousing and order fulfillment, Freight shipping, Supply chain management, International logistics, and delivery to the end customer.
A surface equipment supports both openhole and cased-hole wireline applications, which conserves valuable rig space, reduces the need for personnel training, and enhances operational efficiency and safety.Reduce wireline footprint with flexible surface equipment.
Services to run on wireline into the wellbore and inside the fishing string and fish to locate the area where a fish is stuck by analyzing the difference between the electromagnetic fields of free pipe and stuck pipe to locate the free-point indicator.
Using electromagnetic propagation to measure formation resistivity.
Remote measurement and transmission of electromagnetic data.
Installation or service of downhole pump that is electrically driven
Services to install an electronic submersible pump for artificial lift purposes
Element analyses in water
Services using emulsion mud for well fracturing.
Service to monitor engine oil condition
Evaluation or design services to restore formation pressure and to improve oil displacement or fluid flow in the reservoir.
Use of expandable pipe/screen for sand control during well completion
Expandable tubular services are Visual inspections , threads, and critical sealing components, Make-up and break-out performance ,Geometrical distortion, 100% of the pipe body VME stress, Magnetic particle inspection of the connection’s welds, threads, and critical sealing components , small-scale coupon mechanical testing to determine post-hammering material properties etc
Using a single platform or drilling pad to drill multiple wells in different directions or to different depths.
Performing extended reach well service through coiled tubing.
Services ranging from subsurface model to first oil and beyond. A typical project includes the development of a subsurface reservoir model, a drainage philosophy, a field development plan, technology selection, subsurface well locations, and well design
Fishing (in the oilfield sense) refers to the recovery of unwanted material left in the wellbore. Conventional fishing technologies for cased and open-hole operations include the industry’s largest selection of fishing, milling, cutting, and specialty tools available. field-proven tools and systems are designed to remove wellbore obstructions safely and efficiently so you can maximize production and minimize downtime.
Comprehensive oilfield solutions for all thru-tubing intervention requirements of your well, from milling to thru-tubing fishing and thru-tubing well intervention. We have an experienced team of international and local experts from around the world who will offer you the perfect solution for your well problems, which can then be carried out by our expert field engineers.
The removal of junk, or unwanted debris from a wellbore through coiled tubing.
Services to burn off waste gases in a controlled manner
Control formation of hydrates in production flowlines and equipment
Fluid characterization of crude oil, compositional analyses and physical properties
Service and associated equipment for the treatment or disposal of fluids utilized in the drilling process
Services using foam for well fracturing services.
Services to determine the direction and angle of formation dip in relation to the borehole
Measurement of the bulk density of the formation when drilling.
Services using a matrix used in acidizing, fracturing and other stimulation treatments as means of selectively sealing perforations in the casing and effectively diverting stimulation fluids to other sections of the formation.
Services to collect formation-fluid samples.
Service to identify the location of fractures.
Placing sand in the wellbore and formation with above fracturing pressure.
To pump fluids into the formation for determining properties beneficial to the design process. The properties gained or inferred from this analysis include rock compressive strength, youngs modulus, poisons ratio, fluid leak-off rate, and fracture geometry.
Fracturing through coiled tubing services.
Services to free stuck drill pipe, drill collars, tubing or casing using a free point tool.
Service to monitor fuel oil condition
Services to insure maximum core recovery in unconsolidated formation
Measurement of the natural, or in some cases introduced, radioactivity in a well.
Services used to measure the amount of gamma rays produced in an area.
Measuring the spectrum, or number and energy, of gamma rays emitted as natural radioactivity by the formation.
Service that collects gas from wells and pipes it to compression stations.
Services to inject gas to increase well production
Services to inject gas to increase well productivity.
Service evaluating gas water ratio in pressurized samples
Processing and intrepreting the measurements of the production logs from cased holes
Services to evaluate the volume of rock seen by a measurement made in the borehole, as in a log or a well test.
General services around recording of well data.
Natural and induced-gamma spectrometry methods are used to measure elemental abundances.
The use of geological information to guide a well to its target, especially when the geology turns out to be different from that expected.
Creation of models representing geological or geophysical information
The provision of experienced geologists who are involved in all stages of the development of a well, including identification of potential locations to drill, supporting the monitoring and reservoir evaluation during well development, documenting the geological outcomes of the well, and assisting the drilling team with other work associated with the well.
Services which include interpretation for 3d modeling, biostratigraphy, diagenesis, flooding, log interpretation, organic chemistry, petrology, volumetrics.
Services to provide evaluation, testing, simulation and analysis of geomechanical conditions
Interpretation services 2d, 3d, 4d, attributes, amplitude versus offset (avo), inversion, OBC.
Bit resistivity measurement services.
This is a broad category which could include any type of fluid designed specifically to provide the necessary viscosity or carrying capacity for transporting resieved gravel or proppant down the well and into the annulus.
Services to interpret the changes in gravel pack region.
Applying high well treatments through coiled tubing.
A proppant is a solid material, typically sand, treated sand or man-made ceramic materials, designed to keep an induced hydraulic fracture open, during or following a fracturing treatment. It is added to a fracking fluid which may vary in composition depending on the type of fracturing used, and can be gel, foam or slickwater–based
Frac pumps are diesel-engine-powered fracturing equipment used in hydraulic fracturing of shale rock formations to extract the trapped oil and gas. Frac pumps that can pump fracking fluid down the wellbore (water, silica sand, and fracking chemicals) are in high demand.
Coring directionally, generally from length rather than depth of a well.
Performing of horizontal isolation services through coiled tubing.
Services to pump into a horizontal well.
All hoses should be visually, externally inspected prior to each use and thoroughly inspected with hydrostatic testing you fill up the hose with a medium, such as water, and take it to a pre-specified test pressure and hold it for a period of time. During this pressure phase the hose is monitored and inspected to make sure the hose can withstand the pressure.
Modeling services to predict and identify conditions for hydrate formation
Installation or service of hydraulic pumps used for improved well production
Service to monitor hydraulic oil condition
The process of auditing to identify errors, issues, or weaknesses with the operation and maintenance of the hydrocarbon measurement system.
The petroleum management process by which ownership of extracted hydrocarbons is determined and tracked from a point of sale or discharge back to the point of extraction.
The measurement of hydrocarbons for efficient monitoring and allocation of ownership (through positive displacement, turbine, and electromagnetic flow meters).
Services to predict hydrocarbon reservoir behavior to implementation of the method of recovery which may include: engineering and design, candidate identification, technology selection, rig contracting & management, wellsite supervision, project management
Remove crude oil impurities
Examination by an independent party, to assure appropriate Basis of Design, including casing design, kick tolerance and the design of well control equipment. Also includes examination of the well programme, to ensure that all of the risks have been evaluated, and that the control measures are adequate.
Logistics technology include aviation in the planning, organization, administrative control and enforcement operations in air cargo supply chain. These individual components are connected to the carriage of cargo in collaboration with intermediaries of air freight, airports, airlines and air traffic services.
Integrated facilities management service brings all facilities management contracts under a single service that combines hard facilities management, including elements of the building fabric, and soft FM like security, cleaning and waste management etc.
Services for mature fields that may include some of the following services: engineering of a new subsurface model and a field redevelopment plan, execute well reentry, design sidetracking and infill drilling campaigns, optimize existing wells and reju
Instrument services include the provision of engineering design and procurement of field instrumentation measurement and analytical, metering, and associated scopes and specifications. Service supporting the entire instrumentation, automation and electrical installation throughout each phase of the project.
Maritime logistics is referred to as the process of planning, implementing and managing the movement of goods and information involved in the ocean carriage.
Pipefitting services offer highly-skilled and professionally-certified specialists for flange torque, welding, bolt tensioning, vessel head makeup and removal services, and more. Ensures optimal function and efficiency during repairs and installation periods to reduce equipment failures, secondary damages, and downtime.
Production chemicals are used for enhancing the recovery of hydrocarbons from the well. Various service categories of production chemicals include corrosion inhibitors, scale inhibitors, asphaltene inhibitors, biocides, demulsifies, scavengers, surfactants, and others.
A service includes pump service repair and maintenance, motors Rewind and Repairs, Equipment Controls and Panels, Pump and Control Wiring, Telemetry and Instrumentation etc.
Service which provide monitoring devices which can adjust well production.
Remove iron sulfide deposits in wells and equipment
Rig services for a self-contained combination drilling rig and floating barge, fitted with long support legs that can be raised or lowered independently of each other.
Services to sever downhole coiled-tubing, tubing, drill pipe, or casing.
Analytical services for the recertification of jet fuel
Laboratory testing service means an independent entity engaged to perform specific inspections or tests, either at the project site or elsewhere, and to report and interpret the results of those inspections or tests.
Services for rigs used to drill onshore.
Services to suspend on string of casing from inside the previous casing string
well seismic data is recorded during removal of fish.
Logging while drilling is a general term to describe systems and techniques for gathering down-hole data while drilling without the requirement to remove drill pipe from the well. logging-while-drilling services give you fast, high-quality data for better geo steering & formation evaluation data to maximize reservoir value while drilling.
Processing the well seismic data that is recorded during the excavation of the hole, or shortly thereafter, through the use of tools integrated into the bottomhole assembly
Well seismic data is recorded during the excavation of the hole, or shortly thereafter, through the use of tools integrated into the bottomhole assembly.
well seismic data is recorded during perforating services.
To record a measurement versus depth or time, or both, of one or more physical quantities in or around a well through coiled tubing.
Directional drilling operations base and logistics cover the provision of all operations as per the project scope of work .
Service to monitor lube oil condition in machines, engines and other components.
Measurements of porosity, fractional volumes of bound and moveable fluids, and formation permeability.
A maintenance contract defined as the contract between 2 parties which creates the agreement that one party will maintain an asset owned by another party is common across many industries. Maintenance contracts can exist for equipment, a building, landscape, computers and other information technologies, and more.
Services which may include: optimizing or reengineering well completions and lifting systems, recompletion and stimulation of wells, debottlenecking surface facilities
Services to provide food and sundries, cleaning and security at the wellsite or platform.
Services for oil and gas exploration, development, and production facilities. Services can include from initial evaluation of producing formations to drilling, completion, stimulation, and well maintenance for a single w
Services using organic clay acid stimulation fluid to stimulate the matrix.
Services using organic clay acid for matrix inhibition.
Services to cleanup matrix scale deposition.
Services using a type of inhibition treatment used to control or prevent matrix scale deposition.
Services to plan treatments near-wellbore reservoir formation to enhance the productivity of a well.
Services to analyze and design proper matrix treatments.
Services to administer matrix stimulation injection treatments to ensure a uniform distribution of treatment fluid across the treatment interval.
Analysis and evaluation of the results of matrix treatment.
Services to provide measure the quality and effects of the matrix treatment.
Measurement-While-Drilling (or MWD) is a type of well logging that incorporates the measurement tools into the drill string and provides real-time information to help with steering the drill. Service provides downhole evaluation of formation gamma ray, resistivity, and porosity while drilling is in progress. Mechanical parameters such as the following are also measured and recorded for well surveillance Well deviation and azimuth, Rate of penetration (ROP) ,Weight and torque on bit.
Services used to evaluate formation or production while performing perforating services
Measuring the differences in resistivity of the formation at the borehole face and presenting vertical and lateral resolution information as computer-processed pseudo-images.
The use of a mill or similar downhole tool to cut and remove material from equipment or tools located in the wellbore through coiled tubing. .
Drilling services used for underground mining
Drilling to explore coal seam and or to release and capture methane gas.
rental or leasing of mining machiney
Services to improve rate of penetration
A service for supply of oil and gas drilling fluids, drilling chemicals, drilling mud chemicals and work over completion chemicals. A typical water-based drilling mud contains a clay, usually bentonite, to give it enough viscosity to carry cutting chips to the surface, as well as a mineral such as barite (barium sulfate) to increase the weight of the column enough to stabilize the borehole.
Services for the analysis of materials brought to the surface during the drilling of an oil or gas well, and the analysis of certain mechanical and fluid parameters relating to the drilling process.
Services to drill secondary wellbores away from the original hole.
Installation of production equipment in a well with multiple branches.
The vessel is designed to provide multiple subsea services that support the operators' desire to improve production and reduce costs, with motion characteristics that significantly exceed that of similar length units.
It is common practice to design a well completion in such a way as to combine more than one operation together to improve economics of the over well completion. This involves design of a bottom hole assembly.
Renting, also known as hiring nat diamond impregenated drilling bits or other drill bits for oil and gas drilling activities.
Compositional analyses of natural gas according to ASTM D1945
Use of neutron porosity logging to identify zones of porosity.
The measurement of either thermal or epithermal neutron detection to determine the porosity in a borehole.
Nitrogen purging services are essential when the required nitrogen supply exceeds a plant's ability to maintain the high flow rate often required during shutdowns and other maintenance procedures. Nitrogen purging is highly effective for pipeline purges, product displacement, and process pipeline inert.
The use of nitrogen gas applications through coiled tubing.
Services to provide nitrogen at the well site.
Services for the treatment of a reservoir formation with a non-acid based stimulation fluid.
Placing sand in the wellbore between the sand control screen and the casing at a rate which prevents the bottom hole pressure from exceeding the fracture initiation pressure of the formation.
Processing and interpretation of the measurements of porosity, fractional volumes of bound and moveable fluids, and formation permeability
Use of nmr to provide formation evaluation petrophysical data including porosity, irreducible water saturation, permeability, and grain-size and pore-size distribution.
Services to acquire data through the use of nuclear spectroscopes to determine downhole conditions.
Tubular service covers Visual inspections of the connection’s welds, threads, and critical sealing components , Make-up and break-out performance ,Geometrical distortion measurements outside normal manufacturing tolerances, 100% of the pipe body VME stress, Magnetic particle inspection, threads, and critical sealing components, Small-scale coupon mechanical testing to determine post-hammering material properties etc
Fracking, or hydraulic fracturing, blasts water and chemicals into the seafloor to fracture rock and release oil and gas. Acidizing injects hydrofluoric or hydrochloric acid to etch pathways in rock walls and release the fossil fuels.
A full service of engineering design, Air, Foam, Mist aerated simulations for formations, In underbalanced reservoir drilling emphasis is on protecting the formation, particularly in low-pressure, depleted reservoirs. Encouraging the reservoir to flow while it is being drilled avoids creation of wellbore buildup and its associated negative impact on well productivity and reservoir recovery. Services control the inflow of reservoir fluids into the wellbore while drill. This technique minimizes near-wellbore damage, increases well productivity, and reduces drilling problems such as differential sticking and low rates of penetration especially in mature fields and horizontal wells. Reservoir analysis techniques, fluid systems, and well engineering personnel, wellbore permeability and pressures and ultimately reach total depth.
Activities and fees involved in obtaining technology licenses related to the oil and gas industry
An invert-emulsion mud, or an emulsion whose continuous phase is oil used in fracturing.
Services for hard banding, recutting, rethreading or refurbishment or testing for pressure or leaks in OCTG.
Evaluation and design of system to add energy to the fluid column in a wellbore with the objective of initiating and improving production from the well.
Services that manage the acquisition and interpretation of well log data for evaluation and analysis.
Oilfield audits or inspection services.
Services that create map using bubbles to display data.
Services to create and manage budgets for oilfield projects.
Financial services to plan capital expenditures, cost reductions or analysis for return on capital.
Services to produce case studies for oilfield exploration and production projects.
Services related to installing equipment attached to, and run with, the casing string.
Services to certify procedures, processes or equipment or machinery used in oilfield drilling and completion projects
Creation of models of the assembly of downhole tubulars and equipment required to enable safe and efficient production from an oil or gas well.
Services to provide expert or professional advice for the oil and gas industry
Services to transmit recorded well data and messages.
Services to aggregate or interpret date for statistical or analytical purposes.
Services that provide analysis visually mapping out the problem using the decision tree model to produce calculation to determine risk analysis.
Services using decline analysis to estimate reserves and predict production using either curve fitting and type curve matching methods.
Drafting services to include: autocad, cad, cap, gis, intergraph, pdms, specifications.
Bit engineering/design services.
Services to aid in the selection of the proper bit nozzle size to maximize hydraulic impact force or maximize hydraulic horsepower.
Services for pre-well and future well bit planning.
Services to record seismic data through the drill bit.
Maintenance and repair of drill bits.
Creation of models for constructing the wellbore.
Services to identify opportunities and implement plans for improved drilling performance.
Creation of model for determination of possible economic results.
Oversee oilfield emergency response planning.
Services to sell or buy redundant or surplus oilfield drilling equipment
Creation of models to represent field development.
Oversee the phase of petroleum operations that occurs after exploration has proven successful, and before full-scale production.
Services to provide studies of oilfield geological, geophysical, geomechanical or petrophysical conditions.
Services to retrieve equipment through cased hole.
Services to retrieve equipment through open hole.
Services to retrieve pipe.
Service to dispose of unwanted combustible vapors through a flare.
Interpretation of data produced by the analysis of a well that passes through a natural fracture or that has been hydraulically fractured.
Services to transmit recorded well graphics.
Services to provide a steel screen in the wellbore and the surrounding annulus packed with gravel designed to prevent the passage of formation sand for stabilization purposes.
Services to develop and/or determine values for grid elements on a map.
Management of services for heating and delivering of hot oil on location.
Services for heating and delivering of hot oil or hot water on location.
Services to remove junk or grind casing downhole.
Management of the area of surface land on which exploration or production activity occurs.
Services to manage data log including search/find, access/buy, process/correct, transfer/load, usage and storage functions.
Management of measurement and evaluation of the recording of one or more physical quantities in or around a well.
Services to produce oilfield charts and maps.
A service performed to remove unwanted drilling-fluids as prerequisite for primary cementing success. Mud left in the wellbore can prevent development of a hydraulic seal.
Management of services to remove paraffin and soft wax deposits from the internal wall of production tubulars and completion equipment.
Oversee the services to acquire data to monitor well integrity and maximize production and recovery.
Services to bypass or drill a section parallel to the original well.
Planning from initial appraisal through operational procedures and optimization of the well.
Pressure testing services using cementing service equipment.
Management of the services for alteration of seismic data to suppress noise, enhance signal and migrate seismic events to the appropriate location in space. Processing steps typically include analysis of velocities and frequencies, static corrections, etc.
Evaluation or design of chemistry to increase well production.
Creation of models for the phase that occurs after successful exploration and development.
Evaluation, design or testing of monitoring equipment used for production.
Evaluation, design or testing to forecast the performance of the various elements comprising the completion and production system.
Services to pull pumps for repair or maintenance.
Maintenance of oilfield pumping units.
Repairs services to the pumping machinery.
Services to communicate data to the surface shortly after being recorded.
Oversee oilfield reporting services for creation, generation and interpretation of report.
Services provided for research and development of new product or application
Creation of models to identify and evaluate hazards.
Maintenance on artificial lift systems.
Services using satellites to transmit well data.
Services to put drillpipe into the wellbore when the blowout preventers (bops) are closed and pressure is contained in the well.
Services to wind coiled tubing onto a reel.
Services for production of steam used on location.
Oversee the planning of services for handing over the well drilling and completion services teams to operation and maintenance services of the well.
Maintenance of the steel rod that is used to make up the mechanical assembly between the surface and downhole components of a rod pumping system.
Oversee the development and management of required training for a particular oilfield.
Services to anchor and stabilize the bottom hole assembly for the duration of the intended application.
Repairs to tubulars
Service providing a means of flattening waste material and securing them as bales, to aid efficient storage and transportation, ahead of onward disposal.
Services providing a means of compacting waste, reducing it in size to allow more to be stored in the same place (reduction in volume), ahead of onward transportation and disposal.
Evaluation, design or testing to monitor the volume, treatment and disposal of produced water associated with oil production.
Other well data services.
Services to monitor temperature, pressure, and fluid flow as well as other conditions.
Installation, Routine inspection, repair and maintenance as well as the provision of pressure testing services, Monitoring etc
General well fracturing services.
A service performed to control a loss of drilling fluid to a formation, usually caused when the hydrostatic head pressure of the column of drilling fluid exceeds the formation pressure.
Maintenance of platforms.
The maintenance procedures performed on an oil or gas well after the well has been completed and production from the reservoir has begun
Oil well Project Management service involves planning, organizing and managing project activities required to complete an individual project with predetermined parameters.
Services to control the mineral deposit that can occur in the tubing, the gravel pack, the perforations or the formation.
Hydraulic fracturing (Fraccing) is a method used to extract gas from onshore gas deposits such as coal seams, shales and tight gas (deposits surrounded by rock/sand). Western Australia has only shale and tight gas deposits. If not done correctly, the fraccing process has the potential to contaminate surface and underground drinking water sources.
Installation of production equipment in an open hole
Control organic fouling of pipelines and wells
Services to record the core orientation in relation to its original position in the wellbore.
Other cementing services including engineering, equipment rental, material sales, cementing personnel, grouting, pressure testing,
Any other lifting systems used to improve well production
General production logging services.
Quality control, gravity surveys, magnetics, data management, data recovery, data transcription, navigation data processing, data brokerage.
Other general fracturing services.
A service to rent Polycrystalline Diamond compact drill bits, repair services, reconditioning, custom machining, and custom design and product consultation.
Performing perforating services through coiled tubing.
Services to provided reoccurring tests on the wells equipment such as bop, drill rig, electrical, paint, rotating equipment, structural, tubulars.
A Permanent downhole gauges provide a service to operators about the detailed and accurate information of the well, reservoir, and lift system.
Services using permanent magnetic treatment used for coping with complications caused by emulsion formation, salt precipitation and asphalt and paraffin precipitation.
Services to interpret or build a model using petrophysical information such as data from cased hole logs, core analysis, lwd, open hole logs.
Services for pipeline cleaning
Flow assurance
Enhance pipeline flow
Performing pipeline intervention services through coiled tubing.
Laying of pipeline or flowline with coiled tubing.
Services for the platforms (large structures used to house workers and machinery needed to drill and then produce oil).
Plug cement services.
Services to install or service plunger lifts
Services to measure the openings in a rock, openings in which petroleum can exist.
The recording of pressure, temperature and fluid-flow parameters.
The recording of fluid density.
Services to provide video cameras to assist in production logging and diagnosing problems.
Measurements that describe the nature and behavior of fluids in or around the borehole during production or injection.
Measurements that describe the pressure in or around the borehole during production or injection.
Measurements that describe the temperature in or around the borehole during production or injection.
Production Optimization refers to the various activities of measuring, analyzing, modelling, prioritizing and implementing actions to enhance productivity of a field reservoir/well/surface.
Installation or service progressive cavity pumps
Services to transfer fluid or media with suspended solids or slurries from the suction side of the pump to the discharge side of the pump from storage tanks or through pipelines using a progressive cavity pump.
Processing and intrepreting the measurements of the rate of thermal neutron absorption
Services to drill an extra hole drilled at the bottom of the hole.
Services to install or service reciprocating rod lift services
Hazard assessment; drilling, engineering and planning; directional drilling and intercept; and well kill / plug and abandonment
Creation of models of reservoirs. The model could include any of the geological, fluid or other characteristics of the reservoir.
Services to include modeling, simulation, engineering economics, enhanced oil recover, fluid characterization, monitoring and tracers
Service to monitor residual scale inhibitor in produced water
Use of neutron porosity logging to identify zones of porosity.
The recording of the resistance of formation water to natural or induced electrical current.
Processing and interpretation of the measurements resistivity through the uncased hole
Service includes installations, maintenance, repairs, testing and verification of electronic equipment and automated systems onboard the rig also maintenance and repair of the Dynamic Positioning System, BOP MUX system and the drilling systems.
Services to interpret the rock mechanical properties.
A service to supply roller cone drill bit on rental basis agreement
Service that includes the use of specialized downhole equipment designed to drill directionally with continuous rotation from the surface, eliminating the need to slide a steerable motor
Rotating equipment Integrated Service Contract means a contract pursuant to which the Company and/or a Subsidiary provides both equipment and services to a customer.
Ship inspections services comprise of a thorough visual check on the vessel's physical structure and condition, testing of critical machinery and safety equipment, as well as a comprehensive review of its documentation and certificate history.
Testing prior to pumping a sand control treatment would include fluid suitability tests, formation sand analysis to determine proper gravel sizing, compatibility testing between carrying fluid and formation fluids, carrying fluid quality control tests, etc.
Refers to treatment monitoring services consisting of the recording and displaying of critical treatment parameters during pumping to ensure that proper execution is provided.
Any service or tool that will allow isolation of one productive zone while another zone is being treated. This is typical for multi-zone completions.
Perform sand control through coiled tubing.
Using gravel packing or sand consolidation during completion of a well.
Inhibit scale formation
Service to monitor scale in wells
Services to manage seismic data including search/find, access/buy, process/correct, transfer/load, usage and storage functions.
Use of an explosive tool to cut the outer casing or sea riser casing, to recover the remaining part of the casing in the water column .
Services to support the transport of people and products to and from an offshore platform using sea vessels; includes docking facilities for the support vessels, lay-down and marshaling areas, warehousing, materials handling equipment, etc.
Drilling wells which typically have a curvature radius of 20 to 45 feet, usually dug outwards from a previously drilled vertical well.
Provides shutdown services, manpower supply, annual maintenance contract, hiring services and licensing work services, etc.
Services to place a wedge in a wellbore to force the drill bit to start drilling in a direction away from the wellbore axis.
Services to acquire 2d, 3d, 4d surface seismic and borehole seismic data simultaneously. Land or marine. Includes checkshot, cross well, deviated and slim hole, rig source, offset source, walkaway, salt proximity, microseismic fracture monitoring, 3d, 4dv
Services installing a thin nonelectric cable used for selective placement and retrieval of wellbore hardware, such as plugs, gauges and valves located in sidepocket mandrels.
Use of slickline to retrieve junk objects from downhole.
Use of slickline for installation of gas lift equipment.
Services to provide logging via slickline
Services to reset or operate the slickline.
Services using slickline to run mechanical tools downhole
Services using a slickline to recover pipe from downhole
The communication tunnel created from the casing or liner into the reservoir formation, performed on slickline.
Acoustic logging through slim hole.
Service to cut shafts at an angle rather than vertical for underground mining
Services to expel fluids in the surrounding sponge material for analysis.
Modeling services to design chemical squeeze and prediction of return
Services to perform squeeze cement operations.
Stack Building Services specializes in civil works, structural concrete construction, right up to and including all formwork, Bondek, ground or suspended slabs, and steel reinforcing with the placing and finishing of all concrete.
Services using steerable tools to enlarge a wellbore past its original drilled size.
Services to remove drill stem, tubing, or casing which is stuck.
Christmas trees used in offshore drilling and extraction are called subsea trees. Subsea trees can be vertical or horizontal based on how the master valves the valves set on the flow path and capable of closing off production are designed. Services are required to control hydrocarbon production, complex assemblies of valves and other components are installed at the wellhead to monitor and control production flow, and manage gas or fluids injection etc
A service covers Installation, Repair & Maintenance, Control, monitoring, intervention and distribution systems.
Services to dig and remove material in waterways
Services to rent, lease and provided support for use of Intervention Workover Control System (IWOCS) surface equipment, IWOCS umbilical terminations, Pod retrieval Tools
Services for renting ROV tools, IRM, positioning tools, environmental and subsea construction sectors tools , Oceanographic, Geophysical, NDT equipment etc
Subsea flowlines are the subsea pipes used to connect a manifold to the surface facility in order to convey fluids to or from the host. subsea pipeline inspection of both unpiggable and piggable coated and uncoated subsea pipelines, to help oil and gas operators better understand flow assurance issues and ensure the integrity of their assets, Installation, pipeline commissioning and grout monitoring below.
Subsea hot tapping, also known as pressure tapping, involves connecting to a pressurized system without removing it from service (either by drilling or cutting). It allows the connection of new branch pipework to existing infrastructure without the need for hyperbaric welding or pre-installed tees.
Subsea Inspection, Maintenance and Repair Operations, Condition Monitoring ,Cable and Pipeline Inspection, Remotely Operated Tool Operation, scale squeeze operations and Maintenance of Subsea Systems.
Services to perform various types of pipe/cable laying activities such as carousel, conventional, deepwater, fiber optic, flexible, j-lay, lay barge, reel, power, umbilical
Subsea rock installation is a service for covering pipelines and cables, levelling the seabed or applying scour protection.
Diving services including air, hardsuits, intervention, mixed gas, saturation, surface.
Maintenance and repair of subsea well equipment.
Test bases, jigs, temporary and dummy fixtures simulating wellhead and hub interfaces for the purpose of landing, locking, sealing and testing subsea equipment prior to installation.
Subsea wellheads are the primary pressure barrier for subsea wells providing a secure and pressure-controlled environment for access to the wellbore. They are crucial to the safe and steady production of oil and gas as they act as anchors and suspension points.
Services to convey mechanical tools or logging equipment to perform operational objectives downhole or to perform activities in the final stages of well construction to prepare a well for production.
Subsea production operations service including equipment inspection, monitoring, trouble shooting, etc.
Includes front end engineering design FEED and pre front end engineering design PreFEED projects leading to follow on detailed engineering and construction projects for subsea production systems. FEED and preFEED projects typically include feasibility studies, screening of project ideas and definition of the basic scope, parameters, and economic impacts of the follow on major project. It involves analysis of the capital investment required sufficient to enable management to make a final decision using eco
Service for oil and gas exploration, development, and production facilities. Service can include from initial evaluation of producing formations to drilling, completion, stimulation, and well maintenance for a single well
Services to provide and operate and repair remote operated vehicles.
Services for installation, operation and repair of test trees.
Testing, sampling or monitoring of subsurface conditions at the well site.
Scavenge and remove hydrogen sulfide from oil, water and gas phases
Surface production testing/operation services from front-end engineering and design to execution of services, from surface well testing to early production facilities. Production tests are run to obtain an indication of well productivity and are carried out to determine its flow capacity at specific conditions of reservoir and flowing pressures
Services to include exploration well testing, clean up or flow backs and inline testing of existing wells. Includes flowing the well through temporary production facilities while pressure, temperature and flow rate measurements are made.
Services for measurement of formation properties with electrically powered instruments to infer properties and make decisions about drilling and production operations.
Technical Consultants work with organizations to improve their use of technology and achieve business goals . Consultant with respect to technical matters including engineering, Cost engineering, Cost estimation, Planning, Risk assessment etc.
Asset integrity Information and Data control technical consultant contract service is a service provided by expert staff in a particular area of engineering, Asset integrated Management, Controls & Compliance, Data and document control and information management etc.
Claim management technical consultant contract is a service provided by expert staff in a particular area of science or engineering, most often for projects in these fields. Consulting firms employ engineers, scientists, skilled technicians, and scientific project managers, contract engineer , Quality standardizer ,Claim management etc.
Temporary accommodation support means short-term, temporary or transient accommodation such as a hotel, motel, bed and breakfast or boarding house. Also provides an intensive support service to households placed or facilitated into any form of Temporary Accommodation or Private Rented accommodation and is delivered to support those clients to enable them to sustain their accommodation.
Services to construct a test pit or drill in a test pit.
Services to measure the rate of thermal neutron absorption.
To create holes in the casing or liner to achieve efficient communication between the reservoir and the wellbore through tubing.
Services using perforating guns that are run on tubing.
Service to run tubulars such as casing or tubing or drill pipe into the wellbore.
Drilling wells which typically have a curvature radius of less than 20 feet, usually dug outwards from a previously drilled vertical well.
A Storage reel designed for land and marine applications to handle power cable, subsea umbilical, flexible pipe, hoses. Umbilical type Storage Reel capable of handling connections for hydraulic, chemical, electrical, and fiber optic services.
Evaluation, design and monitoring of applications to obtain underbalanced condition.
Underbalanced drilling tubing is generally considered to involve two phase fluid circulation (nitrified fluid) during drilling to lower the bottom hole pressure to below the reservoir pressure, Underbalanced Drilling With Coiled Tubing is a Safe, Economical Method For Drilling And Completing Gas Wells.
Testing borehole conditions while underbalance drilling.
Services to minimize formation damage by using one of the following techniques (1) lightweight drilling fluids, (2) gas injection down the drill pipe, (3) gas injection through a parasite string, and (4) foam injection; can include the use air, nitrogen.
Evaluation, design or testing of gas storage devices used underground.
Installation service for roof control or protection in mining operations.
Service that installs underground wall seals to block off old mined areas or move fresh air to specific areas of mine.Seals are built to MSHA standards.
Service to install or make repairs to barriers, walls or structures involved in containing or directing the flow of air in underground mining operations.
Vendor/Shop Inspection is the most convenient and cost-effective way to ensure that equipment is in compliance with specifications, client expectations and applicable industry and statutory regulations.
Services to use a compound, typically a metallic salt, mixed with a base-gel fluid for stimulation
Service to monitor water-based hydraulic fluid condition
Services using fluid without clay for stimulation
Design of water or gas control services.
Services to evaluate the water or gas control method.
Services to isolate water or gas in a well.
Services to test the effectiveness of the water or gas control method.
Sample testing of water or gas.
Services to remove a platform for abandonment purposes
Services performed to abandon a well.
Acoustic data imaging services for geological evaluation services.
In performing a wellbore survey, the gyro is pointed in a known direction prior to running in the well, so throughout the survey the spin axis attempts to hold its surface orientation. Note that a compass card is aligned with the horizontal spin axis of the gyro.
To regain control of a blowout well by installing and closing a valve on the wellhead.
Personnel services to run casing into the wellbore.
Services to cut casing while in the wellbore.
Pre-well and future well casing requirements planning services.
Cement evaluation service to measure the bond between the casing and the cement placed in the wellbore annulus between casing and wellbore. The measurement is made with acoustic sonic or ultrasonic tools.
Services to plan projects to permanently seal annular spaces between casing and borehole walls using cement.
Services to remove liquids from the production tubing to initiate flow from the reservoir.
Evaluation and design or testing of the assembly of downhole tubulars and equipment required to enable safe and efficient production from an oil or gas well.
Use of completion fluids and filtration services for well completion.
Services to plan how to optimize the production of hydrocarbons from the well. Ranges from packer on tubing services above an openhole completion to a systems of mechanical filtering elements outside of perforated pipe, to intelligent well completion.
The pumping of chemical systems that create a bond between sand grains to increase the unconfined compressive strength ucs of the rock matrix and therefore extend the life of the well by inhibiting sand production.
Includes well modeling, relief well design, emergency response planning
Services to create a network of separate, interconnected wellbores to enable drainage of multiple target zones.
Services to help develop and structure a contracts for drilling a well.
Services to help maintain a true vertical well path.
Includes bit supervision, and evaluation or advise on bit application, mud engineering, directional drilling, mwd, wireline and surface logging advise, drilling performance optimization , planning, training, implementation (drilling), or knowledge capture.
Services to plan projects for directional drilling and lwd services.
Services to include cleaning, filtration, mixing of mud or fluids.
Includes h2s services.
Services to pickup and/or laydown casing and/or drill pipe at the rig site.
Cleaning service to remove rust, scale, cement and drilling fluids. This can be achieved via air rattling, outside and inside diameter brushing or by a hydro blasting system
Storing of drilling pipe.
Creating threads on drill pipe ends.
Services to monitor any of the following: performance, conditions, pressure, density, rate and concentration, communications, data.
Services to stabilize the drill string while enlarging the borehole.
Labor to oversee drilling procedures.
Services for manufacturing and/or assembling a well components.
Services for extinguishing a well fire.
Includes filtration service and associated equipment leasing of DE filter units, cartridge filter units, shear devices, skids, pod filters.
Services to measure the well production or injection rate.
Services to monitor flow rates.
Services to measure the density or changes in density in production or injection wells.
Measurements of temperature of well fluids.
Services to pump into a closed wellbore with hydraulic pumps to create enough downhole pressure to crack or fracture the formation.
Services for evaluation of a well that passes through a natural fracture or that has been hydraulically fractured.
Services to evaluate and control the height of the fracture.
Services to plan well fracturing stimulation projects.
Services using either permanent and semi-permanent tools to monitor, control, record and report all types of fracturing treatments.
Analysis and design of the fracture fluids and procedures to be used.
Services to evaluate the fracture procedures to be used.
Services used to calculate and control stress in the fracture.
Evaluations of conditions at the surface level during fracturing.
Services to monitor and measure the quality control services for fracturing treatments.
Technique used to isolate wellheads, valves and circulating equipment from subsurface or upstream pressure by forming an ice plug
Services for installation or maintenance of wellhead equipment.
Service to acquire high-resolution resistivity images.
Evaluation, design or testing of services to inject fluid into the reservoir with the primary objective typically being to maintain reservoir pressure.
Performing well kill procedures through coiled tubing.
Services to measure pore pressure, seismic time-depth correlation, bit wear predictions and shear wave.
Services that include detailed engineering and construction of production wells. Plus, delivery and commissioning of all surface facilities and infrastructure, including full project management.
Permanent and removable packers mechanical, hydraulic, wireline, multistring and feed through sealbore.
Evaluation, design or testing of the process to create holes in the casing or liner to achieve efficient communication between the reservoir and the wellbore.
Services to optimize performance of a well which may include: electronic memory and mechanical instrumentation services production logging tools, slickline detonating systems, and tubing/casing calipers.
Modeling, data and computer services used for well planning.
Services used to cut tubing including using abrasive water jet, diamond wire cutting tools, charges and explosives, hydraulic shears, thermic lance boring
Services performed to plug a well.
Services to control well pressure which may include installation bop stack, drilling manifolds, wellheads, gate valves and chokes and other pressure control equipment.
Downhole pressure monitoring while drilling, pressure management including pore pressure prediction, wellbore stability, ECD management, vibration monitoring and control.
Services to stimulate a well to change the profile.
Services to use a slickline or coiled tubing tool used to retrieve temporary devices, such as plugs and flow-control equipment, from the wellbore.
Deepening of an existing oil well or otherwise drilling beyond the extremities (to the side) of the existing well casing or services to perform routine work performed on a well after its completion in order to secure production.
Enhance and restore well production
Services to plan the installation of equipment or application of techniques to prevent migration of reservoir sand into the wellbore or near-wellbore area.
Services to advise customers on procedures used to make a system or design used for drilling as effective or functional as possible.
Services provided at well site during the course of the drilling phase, including identifying and monitoring well drilling progress and supporting well directional steering, through evaluation of the physical formation structure (cuttings analysis) at the time.
Services to inspect or test equipment at the well site.
Oversee the purchasing, scheduling, expediting and delivery of people, products and services to a well site.
Installation or service of systems used to gather data for wellsite monitoring and control of production
Services to monitor and make comparisons of periodic waves such as seismic waves.
Services to design monitor and dispose of linings used in the pit area during drilling.
Well site pressure services using cement services equipment.
Services to monitor pump conditions.
Services for the restoration of abandoned well sites and associated facilities.
Services to acquire data related to the surface of the earth around the well site.
Services to provide downhole measurements and conditions with the ability to readout or store data at the surface.
Downhole well site conditions electrically recorded at the surface.
Services using vacuum trucks to clean out oil pits, oil/water separators at the well site.
Evaluation, design or testing of services for treatment performed to restore or enhance the productivity of a well.
Services to provide surveillance of well data while drilling.
Services to reduce pressure in a wellbore by moving pipe, wireline tools or rubber-cupped seals up the wellbore.
Services using a special perforating gun, or charge, that is designed for limited penetration to allow an inner tubing or casing string to be perforated without damaging a surrounding outer string.
Evaluation and analysis of tubular corrosion.
Includes repair of tubular services.
Measurements used to determine average velocity of a well including using a check shot survey, modeling, vertical, walkaway, geological, slim hole
A treatment conducted within a reservoir or perforated interval to reduce water production.
Vessel service to conduct workovers, for example vessels such as Self Elevating Workover Platforms or SEWOPS often used in shallow waters.
Service for repair or stimulation of an existing production well for the purpose of restoring, prolonging or enhancing the production of hydrocarbons.
Services to manage the pressure control resolution.
Coring samples that can be retrieved by a wireline.
Services using perforating guns that are run on wirelines.