A microprocessor on a single integrated circuit intended to operate as an embedded system.
A microprocessor on a single integrated circuit intended to operate as an embedded system.
A microprocessor on a single integrated circuit intended to operate as an embedded system.
A microprocessor on a single integrated circuit intended to operate as an embedded system.
A capacitor that uses the air as the dielectric substance.
A component that is connected to the device that radiates the electromagnetic wave into the space or captures the radiated electromagnetic wave.
A type of integrated circuit customized for a specific purpose.
A type of printed circuit board using a flexible plastic substrate and having components assembled to it.
This is a passive network of resistors used to reduce signal level.
Rigid or flexible printed circuit boards without mounted electronic components.
A power tube that is centered on the eyes of Grid No. 1 and Grid No. 2 from the tetrode. This is the output tube for power amplification like the pentode.
An arrangement of four diodes in a bridge configuration that provides the same polarity of output voltage for either polarity of input voltage.
Various ceramic materials used in the manufacture of Printed Circuit Board substrates.
A substrate composed of ceramic material used as the platform for an integrated circuit.
A type of integrated circuit applicable to codec devices, e.g., devices or computer programs capable of encoding and/or decoding a digital data stream or signal. The word codec is a contraction of 'compressor-decompressor' or, most commonly, 'coder-decoder'.
A type of device that measures the individual particles of radiation one at a time.
A filter that uses the crystal resonator as the resonance circuit element.
A circuit to take out the original signal wave from the frequency modulation wave or the phase modulation wave, respectively.
A process control system that uses a network to interconnect sensors, controllers, operator terminals and actuators. Generally very large and costly, a DCS typically contains several computers at multiple locations for control and uses proprietary interconnections.
A type of printed circuit board with conductors on both sides but no components.
A semiconductor integrated circuit which provides an interface function between a microprocessor, microcontroller, ASIC or general-purpose peripheral interface and a particular type of display device, e.g. LCD, LED, OLED, ePaper, CRT, Vacuum fluorescent or Nixie.
A holder that seals off or holds the electric or electronic device or component.
An equalizer that employs active components such as transistors in its processing circuits. A pre-amplifying circuit generally follows each stage of actual equalization, boosting the signal level to restore unity gain.
A type of printed circuit board without components, which has undergone an electrolytic process to deposit gold pads.
A vacuum tube for frequency conversion that undertakes both actions of local oscillation and mixture together in a single vacuum tube.
A device obtained with the output of frequency as the multiplier of input frequency.
A device that generates the vibration voltage with the desired frequency by using the direct current as the power.
A device that operates the signal apparatus by using the signal current of several different frequencies, such as responding only by the resonant on specific frequency, automatically identifying the interval of wireless frequency signals, and others.
A capacitor that uses the gas as the dielectric substance.
A type of device that controls the gauge by adjusting the output with the comparison of pre-determined value for the signal received from the sensor or mark the value measured by attaching to the gauge.
A type of printed circuit board with a heavier than normal layer of Cu, greater than 200 microns in thickness, with no components; used in applications of high power distribution, heat dissipation and the like.
A specialized microprocessor designed specifically for digital signal processing,
A coil that is used in the high frequency circuit of electronic device, mainly in radio and television receiver and others.
A device which is inserted in between the signal source with the internal impedance and the load impedance to make the impedance of both sides as the same. This is the 2-terminal double network operated to deliver the valid power to the load from the signal source.
A type of device that is used to combine the two circuits to maintain the impedance in certain ratio at the wideband frequency.
A common type of chip package that uses metal leads that extend outside the housing.
A single component that is used for vacuum tube, semiconductor element or metal rectifier. And this product removes the noise signal for the radar or wireless receiver.
A specialized microprocessor designed specifically for digital signal processing,
Multilayer structure to provide the connections for electronic circuits, similar to printed circuit boards, that are joined just prior to firing. It is fired at lower temperatures allowing co-firing with conductive materials such as silver and gold and allowing the inclusion of components such as resistors into the package.
An iron piece with magnetic body that is attached at the tip of the magnet to regulate the magnetic flux within the adjacent medium.
A resistor that uses the metal membrane made by deposition of nickel, chrome alloy and others on the magnetic plate of alumina as the resistance element.
A capacitor that is the dielectric made in paper, plastic or a combination of paper and plastic. This capacitor is coated with the metal membrane on top.
A capacitor that has thin plate reproduced in natural condition of mica plate or mica piece as the dielectric body.
An electronic tube that uses the principle that there is a change of density in an area with certain distance when a speed change is made to the electron with weak electric wave, and as the external circuit is placed, the strong electric wave is to be derelict.
A type of printed circuit board with no components, consisting of several thin boards, separated by insulating layers and including required internal and external connections.
A type of inductor consisting of a layered coil, wound multiple times around the core. As a result of the multiple layers and the insulation between them, multi-layer inductors have a high inductance level.
A type of flash memory.Flash memory is a non-volatile computer memory that can be electrically erased and reprogrammed. It is a technology that is primarily used in memory cards and USB flash drives for general storage and transfer of data between computers and other digital products.
A type of flash memory.Flash memory is a non-volatile computer memory that can be electrically erased and reprogrammed. It is a technology that is primarily used in memory cards and USB flash drives for general storage and transfer of data between computers and other digital products.
A type of flash memory.Flash memory is a non-volatile computer memory that can be electrically erased and reprogrammed. It is a technology that is primarily used in memory cards and USB flash drives for general storage and transfer of data between computers and other digital products.
A capacitor that uses the oil as the dielectric substance. This device enables for consecutive change for capacitance by mechanical method that the capacity value is adjusted.
A diode that either emits light or is sensitive to it
A transformer that is connected to the output of the amplification circuit that uses the transistor or electronic tube and others to change the impedance of external load circuit to the optimum load impedance for transistor or electron tube load.
A capacitor that uses the paper as the dielectric substance.
A circuit network that makes the phase modulation wave with the phase changes, and simultaneously, the amplitude is also changed that it is refined with certain amplitude through the amplitude limiter and synthesizes the phase modulation circuit by the vector synthesis to the modulation wave with the changing size.
A device that makes automatic compensation for the power factor and maintains the phase equilibrium for power to control the active power of electricity and reactive power and frequency harmonic.
A diode with a wide, lightly doped 'near' intrinsic semiconductor region between a p-type semiconductor and an n-type semiconductor regions. The p-type and n-type regions are typically heavily doped because they are used for ohmic contacts.
Integrated circuit used in applications to monitor, sense or report pressure in a component or system.
Protective doors affixed to the front of panel mounted PLC's to cover the cabling to the module. These are typically hinged and affixed to the module.
Housing to contain modular I/O units connected to PLC's.
An electronic component also called a programmable logic device (PLD) used to build reconfigurable digital circuits.
A signal combining network that allows several discrete inputs to be added into a common bandwidth and that has high isolation between inputs. Also may be called a power combining network
An electron tube that is used as the rectifier that uses the rectification feature of electronic current.
A rotation device that is used to detect the rotation angle from the servomechanism.
A device installed at the intake of an engine to limit its power.
A process control system that performs specified functions to achieve or maintain a safe state of the process when unacceptable or dangerous process conditions are detected. It is separate and independent from regular control systems but is composed of similar elements, including sensors, logic solvers, actuators and support systems.
ICs used in the manufacture of SDAR systems
A plate used in a semiconductor wafer process chamber for partitioning.
A four-layer solid state device that controls current.
A type of printed circuit board with conductors on one side but no components.
An electronic device that consists of an RF signal splitter (power divider) preceded by an RF amplifier that compensates for the RF loss of the splitter. Used to allow one antenna to feed several receivers.
A process control system that collects data from sensors and or machines and sends them to a central computer for management and control. Common components include human to machine interface HMI, remote terminal unit RTU and programmable logic controller PLC.
Surface acoustic wave frequency control devices
A synchronized electric device that receives the location signal of the mechanical rotation angle and transforms the above in proportion to the output electric signal.
A repeater that receives the video signal of the transmitter to convert its channel to re-send, and when converting the channel from several relay sites for same program, it is converted to the same transmission channel for re-sending.
A synchronized electric device that transforms and transmits the location signal of the mechanical rotation angle in proportion to the output electric signal.
A circuit network that is designed to change the electric constant depending on the temperature.
A type of resistor used to measure temperature changes, relying on the change in resistance with changing temperature.
A capacitor that uses the vacuum condition as the dielectric substance.
A specialized diode that changes its level of capacitance depending on the level of reverse bias applied to the diode.
An electronic tube which is to maintain the voltage of power, such as power generator and others, within the limit required regardless of change in input voltage or load change.
A device that attenuates the interfering wave by adding the rejection circuit consisted of high frequency coil and condenser between the receiving antenna and receiver to heighten the selectivity of the receiver.